Mattress Sizes and Prices in Uganda

Mattress sizes and prices in Uganda: the short answer

For mattress sizes and prices in Uganda, start with the size written on the bed frame, then compare the same size, thickness and construction across sellers. The familiar local labels are 3x6, 4x6, 5x6 and 6x6. As of September 2026, direct Rosefoam online evidence places an entry Bonnell spring model from UGX 611,000 and a 12-inch Pocket Hybrid at UGX 972,400 for 3x6, UGX 1,133,600 for 4x6, UGX 1,619,800 for 5x6 and UGX 1,925,300 for 6x6. Those are prices for named products, not a universal market tariff. Confirm the current price, stock, delivery, materials and written warranty before you pay.

A lower price can mean a smaller width, a thinner mattress, a simpler foam core, a different seller, or a clearance promotion. It does not automatically mean a bargain. Equally, a higher price does not prove that a mattress is right for your body or your bed. The useful comparison is like for like: plan size, thickness, foam density or spring system, firmness, cover, delivery terms and warranty terms.

This guide separates confirmed manufacturer information from marketplace leads. It is designed to help a home buyer ask better questions, whether buying a first 3x6, replacing a 5x6, or matching a 6x6 mattress to an existing bed. Prices are editorial market evidence, not Lucky Interiors quotations.

How Ugandan mattress sizing works

In everyday Ugandan furniture shopping, labels such as 3x6 and 6x6 normally describe the mattress footprint in feet: width first and length second. Product pages may write the multiplication sign as 3 × 6, while showroom conversations often use an x. Thickness is separate and is commonly given in inches. Rosefoam's current Pocket Hybrid selector, for example, lists 3 × 6, 4 × 6, 5 × 6 and 6 × 6, each at 12 inches thick.

These labels are helpful, but they are not a substitute for a tape measure. Frame makers can allow a little clearance, upholstered rails can reduce usable space, and a previously made or imported bed may not follow the nominal local size exactly. Measure the inside width and length of the area that supports the mattress. If the bed has a recessed tray, measure that opening rather than the outside edge of the bed.

Rosefoam says its standard range is 3x6 through 6x6 and that it makes custom sizes to order. That is strong evidence for the four common sizes, but it is not evidence that every retailer stocks every thickness in every size. We did not find a primary-source standard range that includes 2x6. Treat 2x6 as a narrow or custom request, get the finished dimensions in writing, and do not assume that sheets or protectors labelled single will fit it.

September 2026 price evidence: what can be compared honestly

The clearest current price evidence we found is Rosefoam's own online store. Its Pocket Hybrid is a premium spring-range mattress with high-density foam on both sides, listed in four sizes at a stated 12-inch thickness. This gives a useful size progression within one defined product. It should not be turned into a price guide for all foam mattresses, all springs, or all brands.

Rosefoam's shop also lists starting prices for several spring constructions. Bonnell Single Layer starts at UGX 611,000; Bonnell Double Layer at UGX 676,000; Pocket Spring Single Layer at UGX 793,000; Pocket Spring Double Layer at UGX 858,000; and the displayed premium spring and hybrid lines start higher. A starting price is the lowest configuration shown, so check which size, thickness and firmness it represents before using it as a budget.

Marketplace listings can help reveal availability, but they need more caution. Jumia's mattress page showed examples of inflatable and camping products at UGX 140,000 for a 3x6 air mattress, UGX 160,000 for a 4x6 air bed, and UGX 220,000 for a 5x6 inflatable with pump. Those are not substitutes for a residential foam or spring mattress. A Jumia search result also showed Rosefoam and high-density prices, but the snippet did not reliably establish all relevant size and seller details, so it is not used as confirmed comparable pricing here.

Foam, high-density foam, rebonded foam and springs

Construction affects feel, movement, heat and price. A conventional foam mattress has a foam core and may be the straightforward everyday option. A high-density foam mattress uses denser foam according to the maker's specification and is commonly positioned for more shape retention under regular use. Rebonded foam is made from bonded foam material and is often used for a firmer core. None of these names alone tells you whether the mattress will be comfortable for you, because layer thickness and firmness also matter.

Eurofoam's official materials provide rare local density detail: it describes standard foam mattresses as 20 density, high-density foam sheets as 25 density, and rebonded sheets as 80 to 90 density. The site does not establish a universal unit explanation, a full mattress build for every model, or a direct life-expectancy comparison. Use the numbers as a prompt to ask for the exact model data, not as permission to rank unrelated mattresses solely by density.

Spring mattresses use coils for support. Rosefoam describes Bonnell systems as the classic, entry-level coil option and pocket springs as independent coils intended to reduce partner movement. Its site presents spring mattresses as bouncy and cool-sleeping, while describing high-density foam as firm, quiet and free of springs to wear out. Those are useful product descriptions from a manufacturer, not independent clinical or durability findings.

Thickness and density: questions that protect your budget

Thickness is visible and easy to compare, but it is not a quality score. A 12-inch mattress can contain more comfort and support material than a thinner mattress, yet its value still depends on what those layers are. A thinner model can be appropriate for a guest room, bunk, low bed or tight budget if it is made for the intended load and sits correctly on the base. Conversely, a thick mattress may make a low headboard disappear or leave too little rail above the mattress edge.

Density is a material measurement, not a promise of personal comfort. Eurofoam's published 20, 25 and 80 to 90 density references show that local makers use density language, but they do not say that a particular number suits every person. Firmness is how the finished mattress feels and responds. It can be affected by the cover, quilting, top layers, spring design and the sleeper's weight as well as the foam core.

Ask whether the quoted thickness is the finished height including quilting and cover, or only the foam core. If the mattress will be used with deep fitted sheets, a high side rail, a storage bed, or an existing headboard, write down the maximum practical height. This prevents buying a mattress that fits the width and length but changes how safely and comfortably the bed is used.

• Request a specification that names the model, size, total thickness, core type, stated density where applicable, comfort layer and cover.
• Ask which side should face up, whether rotation or flipping is recommended, and how often.
• Check the base. Broken slats, wide gaps, an uneven platform or a sagging frame can shorten the useful life of any mattress.
• Compare the feel after lying in your normal sleeping position for more than a few seconds, if a showroom trial is available.
• Keep the invoice, delivery note, product label and warranty document together. They are more useful than a verbal assurance later.

A six-step buying and checking framework

Use this framework when comparing a showroom, manufacturer depot, furniture seller or online listing. It is deliberately practical: the aim is to turn a price tag into an order you can verify at delivery. It also helps separate a genuine brand offer from a vague product description.

1. 1Measure first. Record the inside dimensions of the bed and the height you can accommodate. Photograph the tape measure if someone else will place the order.
2. 2Define the exact use. State whether the mattress is for one adult, a couple, a child, guests, a rental or a hostel. That guides the discussion about size, firmness and expected wear.
3. 3Specify the construction. Ask whether it is standard foam, high-density foam, rebonded foam, Bonnell spring, pocket spring or hybrid. Request the thickness and every material claim in writing.
4. 4Compare a matched basket. Put the same size, thickness and construction side by side. Include delivery, stairs or upcountry transport, old-mattress handling if offered, and any protector or base that is required.
5. 5Verify the seller and warranty. Prefer an official manufacturer depot, showroom or a seller the brand confirms. Ask for the written warranty duration, covered faults, exclusions, claim contact and proof of purchase required. Do not assume a warranty exists because a listing uses the word original.
6. 6Inspect before accepting delivery. Check the label, stated size, height, cover condition, seams and packaging against the invoice. Refuse or document a material mismatch before removing tags or using the mattress, then retain all documents.

Brands, authenticity and warranty evidence

Rosefoam has the most usable direct evidence in this research. Its official site identifies Rosefoam as the leading brand of Royikems Foam Company Ltd, says mattresses are made at its Mbalala, Mukono plant, and offers depot and shop links. The site says custom sizes can be ordered and its product page provides a named model, size selector and price. That makes it a strong source for its own claims, not for every competing brand.

Eurofoam, whose site identifies its company as Euroflex Limited, states that it manufactures foam mattresses and spring mattresses in Uganda. Its official catalogue is useful for broad product categories and density terminology. We did not find publicly displayed, model-by-model warranty terms or an equivalent current price matrix on the pages reviewed. Contact the maker or a confirmed seller for a written quote and warranty before presenting a Eurofoam option as comparable.

For Vitafoam and Royal Foam, do not fill gaps with assumption. The Vitafoam result found in this research was a Nigerian company site, not verified evidence of a Uganda manufacturer, authorised seller, price or warranty. Royal Foam results were third-party Jiji advertisements, including sellers calling goods original. A classified advertisement is not proof of source, authenticity, materials, warranty or normal market price.

Set a realistic budget and compare the final landed cost

A practical September 2026 budget starts with the construction you actually need, then expands by size. Official Rosefoam evidence supports an entry point of about UGX 611,000 for a Bonnell Single Layer starting configuration and a premium 12-inch Pocket Hybrid range from UGX 972,400 to UGX 1,925,300 across 3x6 to 6x6. It does not support a precise national average for basic foam, high-density foam, or every brand.

If a retailer quotes substantially below or above these examples, do not conclude anything from price alone. Ask what is different. The explanation may be legitimate: foam rather than spring, four inches rather than twelve, a smaller width, a different density, clearance stock, transport included, or a seller offering no documented warranty. Put those differences in a small comparison table before deciding.

For a 5x6 frame, compare the mattress cost alongside the bed rather than selecting each in isolation. See 5x6 bed prices in Uganda for the related frame-shopping questions. If ordering online, use established seller contact details, clarify delivery before payment and compare the buyer controls discussed in online furniture stores in Uganda.